2024 Komatsu AE50 Series FB20AU-12

2024 Komatsu AE50 Series FB20AU-12

Swipe to View More

  • Year 2024
  • Make Komatsu
  • Model AE50 Series
2024 Komatsu AE50 Series FB20AU-12

2024 Komatsu AE50 Series FB20AU-12

2024 Komatsu AE50 Series FB20AU-12

Agile and powerful — indoors and out

An excellent option for your outdoor jobs that normally only engine-powered models could handle, the AE50 takes rain, snow and saltwater in stride. Electric forklifts can be hindered by wet and corrosive environments, but the nimble-yet-powerful AE50’s battery-powered, low-maintenance design and exceptional turning ability was engineered for indoors and out.

Features may include:

Exceptional durability
  • Engineered to help lower your downtime, even in harsh conditions. The AE50 series meets IP X4 waterproof standards, and offers airtight wet disc brakes, AC motors that minimize motor brush/contact checks or replacements, weather-resistant controls and more.
A braking system for all seasons
  • You need dependable braking. Unlike conventional drum and shoe braking systems, Komatsu’s airtight wet disc brake system can go up to 10,000 hours with minimal maintenance in most working environments.
High performance from Total AC
  • High performance while helping to minimize costs. The Total AC system utilizes advanced AC drive motors and an AC hydraulic motor to provide high operating efficiency, long operating life and longer run times than conventional DC-type motors.
Engine-like power
  • With all-around Dual Drive, the two front wheels are driven by independent AC drive motors for power and speed comparable to that of an engine-powered truck. And Dual Drive is built to provide great performance even in tough surface conditions.
Nimble controls for more precision
  • AE50 controllers are designed to be light, compact, and simple to use to help improve your operator’s efficiency and precision. The controller itself is thoroughly tested for reliability and housed in a compartment that can resist dust, water and other contaminants.
Designed to IP X4 water-resistant standards
  • All AE50 models are designed to meet IP X4 International water-resistant standards, down to their control micro-switches, potentiometers and control signal circuits. They can be used in coolers, freezers, outdoors, and washed down when needed.

Motor

Motor Type Power Type: Electric
Motor Power Drive Motor (AC): 6.0 x 2 HP | Pump Motor (AC): 12.1 HP

Drivetrain

Steering Fully Hydrostatic Power Steering
Drive Control Drive Motor Control: AC Inverter

Brakes

Brake System Type Service Brake, Operation/Control: Foot / Hydraulic
Parking Brake Operation/Control: Hand / Mechanical

Wheels & Tires

Tires, Front Specification Type: Solid Pneumatic | 200/500 - 10
Tires, Rear Specification Type: Solid Pneumatic | 18 x 6-8
Wheels Number of Wheels, Front/Rear: 2x / 2
Tire Tread Thickness, Front 37.4 in
Tire Tread Thickness, Rear 34.1 in

Battery

Battery Voltage: 48 V
Battery Capacity, Maximum 600 Ah/6hr

Operational

Operating Conditions Operation Type: Sit-Down | Maximum Gradeability: 14%
Operating Speed Travel Speed, Loaded/Unloaded: 9.0 / 10.0 mph | Lifting Speed, Loaded/Unloaded: 55.1 / 98.4 fpm | Lowering Speed, Loaded/Unloaded: 72.8 / 86.6 fpm

Hydraulics

Relief Valve Setting Relief Pressure - Attachment: 2,300 psi

Dimensions

Wheelbase 57.9 in
Dimensions Load Distance From Center Axle (2 Stage): 17.7 in | Tilting Angle, Forward/Backward: 6 / 10 deg | Forks, Thickness: 1.4 in | Right Angle Stacking Aisle: 129.1 / 136.9 in
Height Mast Height - Lowered: 89 in | Mast Height - Extended:168.1 in | Maximum Fork: 129.9 in | Overhead Guard: 81.5 in
Lift Height Free: 6.7 in
Length with Standard Forks: 128 in | to Fork Face: 85.8 in | Forks: 42.1 in
Overall Width at Drive Tires: 45.7 in
Width Forks: 4.8 in | Carriage: 38.2 in
Ground Clearance Under Mast: 3.7 in | Center of Wheelbase: 4.9 in
Outside Turning Radius 72.8 in

Capacities

Cargo Capacity @ 24 in (600 mm) Load Center: 4,000 lbs.
Axle Capacity, Front Axle Loading - Loaded Front: 10,940 lbs. | Axle Loading - Unloaded Front: 4,020 lbs.
Axle Capacity, Rear Axle Loading - Loaded Rear: 1,430 lbs. | Axle Loading - Unloaded Rear: 4,350 lbs.
Drawbar Capacity Maximum Drawbar Pull, Loaded: 2,040 lbs.
Hydraulic Capacity Oil: 6.1 US gal

Weights

Weight Service: 8,370 lbs. | Minimum Battery: 1,680 lbs. | Maximum Battery: 2,100 lbs.

Features

Features Carriage ITA Class: II

Product Photography