C&C Lift/Truck Inc.
- 30 Parkway Place
- Edison, NJ 08837
- Call Us: (866) 770-5438
- https://www.cnclifttruck.com/
2024 Komatsu AE50 Series FB20AU-12
Information
2024 Komatsu AE50 Series FB20AU-12
Agile and powerful — indoors and outAn excellent option for your outdoor jobs that normally only engine-powered models could handle, the AE50 takes rain, snow and saltwater in stride. Electric forklifts can be hindered by wet and corrosive environments, but the nimble-yet-powerful AE50’s battery-powered, low-maintenance design and exceptional turning ability was engineered for indoors and out.
Features may include:
Exceptional durability- Engineered to help lower your downtime, even in harsh conditions. The AE50 series meets IP X4 waterproof standards, and offers airtight wet disc brakes, AC motors that minimize motor brush/contact checks or replacements, weather-resistant controls and more.
- You need dependable braking. Unlike conventional drum and shoe braking systems, Komatsu’s airtight wet disc brake system can go up to 10,000 hours with minimal maintenance in most working environments.
- High performance while helping to minimize costs. The Total AC system utilizes advanced AC drive motors and an AC hydraulic motor to provide high operating efficiency, long operating life and longer run times than conventional DC-type motors.
- With all-around Dual Drive, the two front wheels are driven by independent AC drive motors for power and speed comparable to that of an engine-powered truck. And Dual Drive is built to provide great performance even in tough surface conditions.
- AE50 controllers are designed to be light, compact, and simple to use to help improve your operator’s efficiency and precision. The controller itself is thoroughly tested for reliability and housed in a compartment that can resist dust, water and other contaminants.
- All AE50 models are designed to meet IP X4 International water-resistant standards, down to their control micro-switches, potentiometers and control signal circuits. They can be used in coolers, freezers, outdoors, and washed down when needed.
Highlights
- Edison, New Jersey
- 2024
- Komatsu
- AE50 Series FB20AU-12
- Available
- Forks: 4.8 in | Carriage: 38.2 in
- Mast Height - Lowered: 89 in | Mast Height - Extended:168.1 in | Maximum Fork: 129.9 in | Overhead Guard: 81.5 in
Specifications
- 2024
- Komatsu
- AE50 Series
- FB20AU-12
- Cushion Tire
- Power Type: Electric
- Drive Motor (AC): 6.0 x 2 HP | Pump Motor (AC): 12.1 HP
- Fully Hydrostatic Power Steering
- Drive Motor Control: AC Inverter
- Service Brake, Operation/Control: Foot / Hydraulic
- Operation/Control: Hand / Mechanical
- Type: Solid Pneumatic | 200/500 - 10
- Type: Solid Pneumatic | 18 x 6-8
- Number of Wheels, Front/Rear: 2x / 2
- 37.4 in
- 34.1 in
- Voltage: 48 V
- 600 Ah/6hr
- Operation Type: Sit-Down | Maximum Gradeability: 14%
- Travel Speed, Loaded/Unloaded: 9.0 / 10.0 mph | Lifting Speed, Loaded/Unloaded: 55.1 / 98.4 fpm | Lowering Speed, Loaded/Unloaded: 72.8 / 86.6 fpm
- Relief Pressure - Attachment: 2,300 psi
- Load Distance From Center Axle (2 Stage): 17.7 in | Tilting Angle, Forward/Backward: 6 / 10 deg | Forks, Thickness: 1.4 in | Right Angle Stacking Aisle: 129.1 / 136.9 in
- 57.9 in
- Mast Height - Lowered: 89 in | Mast Height - Extended:168.1 in | Maximum Fork: 129.9 in | Overhead Guard: 81.5 in
- Free: 6.7 in
- with Standard Forks: 128 in | to Fork Face: 85.8 in | Forks: 42.1 in
- at Drive Tires: 45.7 in
- Forks: 4.8 in | Carriage: 38.2 in
- Under Mast: 3.7 in | Center of Wheelbase: 4.9 in
- 72.8 in
- @ 24 in (600 mm) Load Center: 4,000 lbs.
- Axle Loading - Loaded Front: 10,940 lbs. | Axle Loading - Unloaded Front: 4,020 lbs.
- Axle Loading - Loaded Rear: 1,430 lbs. | Axle Loading - Unloaded Rear: 4,350 lbs.
- Maximum Drawbar Pull, Loaded: 2,040 lbs.
- Oil: 6.1 US gal
- Service: 8,370 lbs. | Minimum Battery: 1,680 lbs. | Maximum Battery: 2,100 lbs.
- Carriage ITA Class: II