2024 Komatsu AM50 Series FB15U-12

2024 Komatsu AM50 Series FB15U-12

Swipe to View More

  • Year 2024
  • Make Komatsu
  • Model AM50 Series
2024 Komatsu AM50 Series FB15U-12

2024 Komatsu AM50 Series FB15U-12

2024 Komatsu AM50 Series FB15U-12

Agile and powerful — indoors and out

Electric forklifts can be hindered by wet and corrosive environments, but the nimble yet powerful 3-wheeled AM50 takes rain, snow, and salt water in stride. Its battery-powered sustainability, low maintenance design and unsurpassed turning ability mean it’s perfect for outdoor jobs that previously only engine-powered models could handle.

Features may include:

Exceptional durability
  • Limit your downtime even in harsh conditions. The AM50 series forklifts meet IP-X4 water-resistant standards and offer airtight, wet disc brakes, AC motors that eliminate motor brush/contact checks or replacements, weather-resistant controls and more.
A braking system for all seasons
  • An airtight, wet disc brake system assures dependable braking in most working environments. Unlike conventional drum-and-shoe braking systems, Komatsu’s wet disc brake system can go up to 10,000 hours with little more than oil changes.
High performance from Total AC
  • Achieve high performance with minimal costs with an AC system that utilizes advanced AC drive motors and an AC hydraulic motor. The Total AC system’s AC motors provide high operating efficiency, long operating life and longer run times than conventional DC-type motors.
More power for higher productivity
  • When you need great performance in bad surface conditions. All-around Dual Drive means the two front wheels are driven by independent AC drive motors for power and speed comparable to that of an engine-powered truck.
Nimble controls for more precision
  • Efficiency and precision from controllers designed to be light, compact, and simple to use. The controller itself is reliability tested and housed in a compartment that resists dust, water and other contaminants.
Designed to IPX4 Standards
  • A forklift for coolers, freezers, the outdoors, and that can be safely washed down when needed. AM50 models are designed to meet IP-X4 water-resistant standards, down to the control micro-switches, potentiometers and control signal circuits.

Motor

Motor Type Power Type: Electric
Motor Power Drive Motor (AC): 6.0 x 2 HP | Pump Motor (AC): 12.1 HP

Drivetrain

Steering Fully Hydrostatic Power Steering
Drive Control Drive Motor Control: AC Inverter

Brakes

Brake System Type Service Brake, Operation/Control: Foot / Hydraulic
Parking Brake Operation/Control: Hand / Mechanical

Wheels & Tires

Tires, Front Specification Type: Cushion | 18 x 7 x 12.13
Tires, Rear Specification Type: Cushion | 15 x 5 x 11.25
Wheels Number of Wheels, Front/Rear: 2x / 2 (dual)
Tire Tread Thickness, Front 37.0 in
Tire Tread Thickness, Rear 6.7 in

Battery

Battery Voltage: 48 V
Battery Capacity, Maximum 600 Ah/6hr

Operational

Operating Conditions Operation Type: Sit-Down | Maximum Gradeability: 19%
Operating Speed Travel Speed, Loaded/Unloaded: 10.0 / 11.0 mph | Lifting Speed, Loaded/Unloaded: 66.9 / 118.1 fpm | Lowering Speed, Loaded/Unloaded: 88.6 / 108.3 fpm

Hydraulics

Relief Valve Setting Relief Pressure - Attachment: 2,300 psi

Dimensions

Wheelbase 52.8 in
Dimensions Load Distance From Center Axle (2 Stage): 15.9 in | Tilting Angle, Forward/Backward: 6 / 10 deg | Forks, Thickness: 1.4 in | Right Angle Stacking Aisle: 120.5 / 125.3 in
Height Mast Height - Lowered: 84.4 in | Mast Height - Extended: 167.5 in | Maximum Fork: 129.9 in | Overhead Guard: 81.5 in
Lift Height Free: 5.9 in
Length with Standard Forks: 118.3 in | to Fork Face: 76.2 in | Forks: 42.1 in
Overall Width at Drive Tires: 43.8 in
Width Forks: 3.9 in | Carriage: 38.2 in
Ground Clearance Under Mast: 3.7 in | Center of Wheelbase: 4.9 in
Outside Turning Radius 60.2 in

Capacities

Cargo Capacity @ 24 in (600 mm) Load Center: 3,000 lbs.
Axle Capacity, Front Axle Loading - Loaded Front: 8,760 lbs. | Axle Loading - Unloaded Front: 3,420 lbs.
Axle Capacity, Rear Axle Loading - Loaded Rear: 1,250 lbs. | Axle Loading - Unloaded Rear: 3,590 lbs.
Drawbar Capacity Maximum Drawbar Pull, Loaded: 2,150 lbs.
Hydraulic Capacity Oil: 6.1 US gal

Weights

Weight Service: 7,010 lbs. | Minimum Battery: 1,590 lbs. | Maximum Battery: 2,100 lbs.

Features

Features Carriage ITA Class: II

Product Photography