2024 Komatsu BX50 Series Pneumatic FG30HT-16

Information

2024 Komatsu BX50 Series Pneumatic FG30HT-16

Big power and performance

The BX50 IC pneumatic forklift combines Komatsu’s long history of rigorous engineering in construction equipment with features designed to increase efficiency and reduce operator fatigue.

Features may include:

Enhanced safety for employees and goods
  • The Komatsu Operator Presence System (KOPS) Plus, standard with BX50 series, locks out lift, lower, tilt and travel functions when the operator leaves the seat for more than three seconds. The forks cannot lower while the key is in the off position.
High-efficiency drivetrain
  • Our expertise in construction is behind the BX50’s full floating drive train. High torque delivered by powerful engines is channeled through a heat dissipating aluminum transmission case and a rugged dust- and leak-resistant, double-seal U-joint design.
Advanced ergonomic design
  • Designed to improve operator comfort and reduce fatigue, the Komatsu Komfort Zone is a dual floating structure: dampening mounts protect the frame from engine vibration; additional mounts isolate your operators from the frame. Sealed floorboard reduces engine noise and heat.
Angled ports to manage exhaust and dust
  • Hot engine air, dust and exhaust can affect operators over time. The BX50 series’ angled exhaust ports in the counterweight aim exhaust away while traveling in reverse. Exhaust vents low on the counterweight point away from the ground and don’t stir up dust.
Excellent sightlines front and rear
  • An unrestricted view of the fork tips and surroundings for the operator. The thoughtfully designed EZ view mast, console and low-profile dash provide outstanding forward visibility. Upper corners of the counterweight are angled for clear sightlines in reverse.

Photos

Highlights

  • Edison, New Jersey
  • 2024
  • Komatsu
  • BX50 Series Pneumatic FG30HT-16
  • Model: GK25
  • Powershift
  • Available
  • Forks: 5 in | Carriage: 41 in
  • Mast Height - Lowered: 85.5 in | Mast Height - Extended: 176 in | Maximum Fork: 128 in | overhead guard: 83.9 in

Specifications

  • 2024
  • Komatsu
  • BX50 Series Pneumatic
  • FG30HT-16
  • Pneumatic
  • Model: GK25
  • GCT
  • Rated Output (SAE Net): 60 HP @ 2,700 rpm
  • (SAE Net): 136 lbs.-ft. @ 2,000 rpm
  • 4
  • 152 in3
  • Power Type: LPG
  • FHPS
  • Powershift
  • Operation/Control: Foot / Hydraulic
  • Operation/Control: Hand / Mechanic
  • Type: Pneumatic | 28 x 9 - 15 - 12PR (I)
  • Type: Pneumatic | 6.5 - 10 - 10PR
  • Number of Wheels, Front/Rear: 2x / 2
  • 40.4 in
  • 38 in
  • Operation Type: Sit-Down | Max. gradeability: 27%
  • Travel Speed, Loaded/Unloaded: 11.5 / 12.1 mph | Lifting Speed, Loaded/Unloaded: 104 / 124 fpm | Lowering Speed, Loaded/Unloaded: 98 / 98 fpm
  • Sound Level: 82 dB
  • Relief Pressure, Maximum: 2,630 psi
  • Load Distance From Center Axle (2 Stage): 19.1 in | Tilting Angle - 2 stage masts, Forward/Backward: 6 / 12 deg | Tilting Angle - 3 stage masts, Forward/Backward: 6 / 5 deg | Forks, Thickness: 2 in | Right Angle Stacking Aisle: 112.4 in
  • 66.9 in
  • Mast Height - Lowered: 85.5 in | Mast Height - Extended: 176 in | Maximum Fork: 128 in | overhead guard: 83.9 in
  • Free: 5.5 in
  • with Standard Forks: 148.8 in | to Fork Face: 106.7 in | Forks: 42 in
  • at Drive Tires: 48.6 in
  • Forks: 5 in | Carriage: 41 in
  • Under Mast: 5.5 in | Center of Wheelbase: 7.5 in
  • 93.3 in
  • @ 24 in Load Center: 6,000 lbs.
  • Axle Loading, Loaded Front: 13,510 lbs | Axle Loading - Unloaded Front: 3,600 lbs.
  • Axle Loading, Loaded Rear: 1,910 lbs | Axle Loading - Unloaded Rear: 5,810 lbs.
  • Maximum Drawbar Pull, Loaded: 4,600 lbs.
  • 15.3 US gal
  • Service: 9,410 lbs.
  • Carriage ITA Class: II